Rechargeable hunting flashlight Fenix HT18R V2.0 belongs to the tactical flashlights with the greatest range in the lineup. Its massive reflector offers a reach of up to 1100 meters and a luminous flux of up to 3700 lumens (ANSI). The light source is a high-performance LED Luminus SFT-90 with a lifespan of 50,000 hours. Power is provided by one Li-ion 21700 type battery with a capacity of 6000 mAh (the Fenix ARB-L21-6000 battery is included in the package). The Fenix LED flashlight HT18R V2.0 has a total of seven lighting modes (four steady and three flashing) with a runtime of up to 87 hours. On the side of the flashlight is a tactical dual switch allowing instant activation by pressing, instant activation of maximum output, and quick activation of the strobe from the off state. The flashlight charges via a modern USB-C connector. The flashlight is compatible with mounts for long guns and the Fenix AER-05 cable switch. Fenix HT18R V2.0 is a top lighting tool for professionals, hunters, and all users requiring the longest possible long-distance reach.

All flashlight parameters (luminous flux, runtime on batteries, waterproofing, range and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Specifications of the Fenix HT18R V2.0 hunting flashlight

• A premium Luminus SFT-90 LED with a lifespan of 50,000 hours is used.
• Seven lighting modes: 3700 lumens (2 hours) -> 1000 lumens (3 hours) -> 350 lumens (6 h 50 min) -> 30 lumens (87 hours) -> strobe (3000 lumens) -> SOS (150 lumens) -> beacon (3700 lumens).
• Large smooth reflector for a beam with a reach of 1100 meters (268,000 cd).
• Electronics with digital constant output regulation, reverse battery insertion protection, and protection against over-discharge of the battery.
• Power is provided by one Li-ion 21700 6000 mAh battery.
• Max. battery diameter 22 mm, max. battery length 77 mm.
• Charging via built-in waterproof USB-C connector on the flashlight body.
• Dimensions 19.97 cm (length) x 6.8 cm (head diameter) x 2.54 cm (body diameter).
• Intelligent overheating protection.
• The flashlight has memory and always turns on in the last set mode, except for strobe, beacon and SOS.
• Flashlight body made of aerospace-grade hardened aluminum, head complemented with a striking bezel.
• Durable hard-to-scratch finish - Type III hard anodized.
• Impact resistant to drops from 1 meter.
• Trapezoidal threads highly resistant to wear.
• Weight 358.2 grams (including battery).
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Hardened ultra-clear glass lens with anti-reflective coating.
• Batteries stored between two springs - withstands recoil when used on a firearm without problems.
• Side switches on the flashlight (momentary on/off function), direct entry to turbo mode (instant turbo) and direct entry to strobe mode (instant strobe).
• The flashlight comes with the ARB-L21-6000 battery, a USB-C charging cable, wrist strap, belt pouch and a spare O-ring.
• The following accessories are also compatible with the flashlight: red filter, Fenix AER-05 cable switch, quick-release rail mount ALG-15, quick-release rail mount ALG-00, M-LOK mount Fenix ALG-16, barrel mount Fenix ALG-18, metal magnetic barrel mount, plastic magnetic barrel mount, optic-mounted flashlight mount, metal optic mount.
• Optional purchases for the flashlight include a USB AC adapter and a USB car adapter.

Operation of the Fenix HT18R V2.0 hunting flashlight

There may be an insulating cover on the battery from the factory. Before first use remove it.

Turning on/off and switching light modes - press the round tactical switch for momentary illumination; the flashlight will turn off upon release. Fully pressing the tactical switch will turn the flashlight on continuously. When the flashlight is on, output levels are switched by pressing the functional rectangular switch. Holding the functional switch for 0.5 seconds activates the flashing modes.

Instant Strobe - from the off state press and hold the functional rectangular switch; the flashlight will turn off upon release.

Instant Turbo mode - from any state (on/off) hold the round tactical switch for 0.5 seconds. Upon release the flashlight returns to the previously used output. If it was off, it will turn off upon release.

Lockout function - hold both switches simultaneously for 3 seconds. When locked the flashlight will blink twice. Upon unlocking it will light in the last used steady mode.

Memory of the last set output mode - the flashlight remembers the last used output mode except for flashing modes. On next activation it will start in the last used steady mode.

Charging- slide the cover of the charging connector on the side of the flashlight and plug the USB-C charging cable into the charging port. After charging is complete slide the cover back. During charging the indicator lights red, and turns green when fully charged. The flashlight cannot be used during charging. Typical charging time for a fully discharged ARB-L21-6000 battery is approximately 1.5 hours using a 9 V / 3 A USB source, or 2.5 hours using a 5 V / 3 A source.

Battery charge indicator - at each turn-on the indicator LED activates for three seconds. If the indicator LED is green, the battery is charged above 85%. Green blinking means 50-85% capacity. If it is red, it is charged 25-50%. Red blinking indicates less than 25% battery capacity remaining.

Intelligent overheating protection - if the flashlight temperature exceeds 60 °C, output will be automatically reduced. Once temperature drops below 60 °C, output will gradually increase again.

Low battery warning - if the voltage drops below the preset level, the flashlight will reduce brightness to a lower level. Upon reaching the lowest output the battery charge indicator will start blinking red to remind you to recharge or replace the battery.

Warning

• Use only high-quality rechargeable 21700 Li-ion batteries with protection circuitry.
• Insert batteries with the positive pole towards the head of the flashlight.
• If the protective rubber rings appear damaged after long use, replace them. The rings should also be lubricated to prevent rubber erosion. Following these rules will properly protect the flashlight against water.
• If the flashlight is flickering, will not switch to higher modes or will not turn on, it may be for one of the following reasons:
  • The battery is nearly discharged – charge or replace it.
  • Contacts inside the flashlight are dirty – clean them with a cotton swab soaked in alcohol.
  • The head, body or tail of the flashlight are loose, tighten them.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.